How to Compare Nutrients on a Dry Matter Basis
Nov. 17, 2026
Share:
Comparing nutrient levels in Dry Pet Food can be misleading when products contain different amounts of moisture. A food with 10 percent protein on an as-fed basis may contain more actual protein than a food with 8 percent protein, but the comparison is not reliable until both products are converted to a dry matter basis.
This guide explains how to compare protein, fat, fiber, carbohydrates, minerals, and calories step by step. It is designed for pet food buyers, formulators, distributors, retailers, veterinarians, and pet owners who need a fair comparison between wet food, dry food, treats, supplements, and other products.
An as-fed nutrient value describes the nutrient concentration in the product as it is sold and consumed. The value includes both nutrients and moisture.
For example, a label may show:
These values are based on the total weight of the food, including its 78 percent water. The protein percentage therefore appears lower than it would if the water were removed.
Dry matter is the portion of a food that remains after all water is removed. It includes protein, fat, fiber, carbohydrates, ash, vitamins, and minerals.
Dry matter basis comparison is especially important when comparing:
Purchasers often need to know whether a higher-priced food actually provides more protein, fat, or other nutrients. A simple label comparison can create the wrong conclusion because high-moisture foods appear to have lower nutrient percentages.
Converting every product to the same dry matter basis helps buyers answer practical questions:
The calculation does not require laboratory equipment when complete label information is available. Prepare the following tools:
Look for the guaranteed analysis section on the package, technical data sheet, or certificate of analysis. Moisture is commonly listed as a maximum percentage.
Typical moisture values include:
Do not estimate moisture from the product texture. Use the stated value whenever possible.
Write down the nutrient values you want to compare. Common values include:
Make sure all products use percentages on the same weight basis before starting. A value listed in milligrams per kilogram cannot be compared directly with a percentage until it is converted.
Use this formula:
Dry matter percentage = 100 - moisture percentage
Example:
This means that 22 percent of the product weight consists of non-water material.
Find the nutrient value on the label. For example:
The protein value is 10 percent of the complete product weight, not 10 percent of the dry matter.
Use this formula:
Dry matter nutrient percentage = as-fed nutrient percentage / dry matter percentage x 100
Using the example above:
The product contains 45.45 percent protein on a dry matter basis, even though the label shows 10 percent protein as fed.
Use the same dry matter percentage for each nutrient in the same product.
Example product data:
Dry matter content is 22 percent. The converted values are:
Keep at least two decimal places during the calculation. Round only the final result. Rounding the moisture or nutrient value too early can create small differences between products.
For purchasing comparisons, a practical format is:
Assume the following label information:
| Product | Moisture | Protein as fed | Fat as fed |
|---|---|---|---|
| Product A, wet food | 78 percent | 10 percent | 5 percent |
| Product B, dry food | 10 percent | 25 percent | 12 percent |
Product A has 22 percent dry matter. Product B has 90 percent dry matter.
Product A:
Product B:
Although Product B shows a higher protein percentage on the label, Product A has the higher protein concentration on a dry matter basis. This does not automatically mean Product A is the better choice. Ingredients, digestibility, calories, life-stage suitability, quality controls, and feeding quantity must also be evaluated.
A structured table makes product selection easier and reduces calculation errors.
| Product | Moisture | Dry matter | Protein dry matter | Fat dry matter | Calories |
|---|---|---|---|---|---|
| Product A | 78 percent | 22 percent | 45.45 percent | 22.73 percent | Record label value |
| Product B | 10 percent | 90 percent | 27.78 percent | 13.33 percent | Record label value |
Different buyers have different priorities. Do not compare only the nutrient with the highest advertised value.
Carbohydrates are not always listed on pet food labels. They can be estimated by subtracting protein, fat, fiber, moisture, and ash from 100.
Use this formula:
Estimated carbohydrate as fed = 100 - protein - fat - fiber - moisture - ash
Example:
Convert the result to a dry matter basis:
This is an estimate, not a direct laboratory measurement. The result can be affected by how the manufacturer reports fiber and ash.
Calcium, phosphorus, and other minerals can be compared in the same way when the label provides percentage values.
For example:
Mineral ratios should also be calculated after converting both minerals to the same basis. A calcium-to-phosphorus ratio can be calculated as:
Calcium-to-phosphorus ratio = calcium dry matter percentage / phosphorus dry matter percentage
For health-related decisions, use qualified veterinary or nutrition advice. A numerical comparison alone does not confirm that a food is appropriate for a specific medical condition.
Dry matter percentage shows nutrient concentration, but it does not show how much nutrient a pet consumes each day. Daily intake also depends on serving size and calorie density.
For a more complete comparison, review:
A food with a higher dry matter protein percentage may provide less total daily protein if the pet eats a much smaller portion. Concentration and intake are related but different measurements.
Decide what the comparison must achieve before reviewing labels. The purchasing objective may be:
Request the same information for each product. Useful documents include:
Use one spreadsheet row for each product and one column for each nutrient. Calculate dry matter first, then convert every nutrient using the same formula.
A spreadsheet structure may include:
Use the converted figures as one part of the purchasing decision. Also compare:
If a product shows an unexpectedly high or low nutrient value, request a laboratory report or contact the manufacturer. Guaranteed analysis values are generally regulatory label values and may be expressed as minimums or maximums rather than exact typical results.
For ingredient sourcing, formulation, or quality control, Xinji Biotechnology can help purchasers review technical information and select suitable pet nutrition materials and product solutions.
The most common error is comparing a wet food's protein percentage directly with a dry food's protein percentage. Because wet food contains more water, its as-fed value usually looks lower.
Always convert both products to dry matter basis before comparing nutrient concentration.
The correct denominator is dry matter, not moisture.
Many guaranteed analysis values use minimum or maximum declarations. For example, crude protein may be a minimum and crude fiber may be a maximum.
Use laboratory results or typical analysis data when precision is important. Do not assume that the label number represents the exact nutrient content in every batch.
Do not compare percentages with grams per kilogram, milligrams per kilogram, or calories without converting them to compatible units.
Check whether each value is reported:
If ash or fiber is omitted from the carbohydrate-by-difference formula, the estimated carbohydrate level will be inaccurate. Use all available label components and clearly identify the result as an estimate.
A higher protein percentage does not automatically indicate superior product quality. Protein source, amino acid balance, digestibility, processing, energy density, and the pet's nutritional needs must also be evaluated.
Dry matter percentages do not show how much food the pet needs. A calorie-dense product may be fed in a smaller quantity, which changes daily nutrient intake and cost.
A complete diet, treat, topper, supplement, and therapeutic product may have very different nutritional roles. Confirm the intended use, life stage, and feeding instructions before comparing values.
A dry product contains:
Dry matter is 90 percent.
A wet product contains:
Dry matter is 20 percent.
Dry matter conversion is an essential first step because it creates a fair mathematical comparison. It should not be the only basis for selecting a food or ingredient.
After conversion, confirm:
A high-moisture product contains less dry material per kilogram. To compare ingredient or nutrient value fairly, calculate the dry matter fraction.
Example:
This calculation does not replace a cost-per-calorie comparison, but it helps purchasers understand how much non-water material they are buying.
Save the label version, calculation date, supplier name, batch number, and laboratory data. Product labels and formulations can change, so an old calculation may not represent the current product.
A documented record helps purchasing teams:
When the moisture level is different, nutrient percentages can create a false impression of quality or value. By collecting the right label data, calculating dry matter correctly, checking calories, and avoiding common mistakes, buyers can make a more accurate decision about Dry Pet Food and other pet nutrition products. Xinji Biotechnology supports informed pet food purchasing with reliable product information and practical nutrition comparison guidance.
Related News
Nov. 17, 2026
How to Compare Nutrients on a Dry Matter Basis
Comparing nutrient levels in Dry Pet Food can be misleading when products contain different amounts of moisture. A food with 10 percent protein on an as-fed basis may contain more actual protein than a food with 8 percent protein, but the comparison is not reliable until both products are converted to a dry matter basis.
View More
Nov. 16, 2026
Questions to Ask About MOQ, Lead Time, and Production Capacity
When evaluating a Private Label Pet Food Manufacturer, I recommend using a structured qualification process: first confirm the minimum order quantity (MOQ), then map the complete lead-time schedule, verify production capacity and quality controls, and finally document every commercial term in the quotation and manufacturing agreement. By asking the right Questions to Ask About MOQ, Lead Time, and
View More
Nov. 13, 2026
Palatability vs Potency: Formulation Trade-offs Brands Must Consider
A pet supplement can contain a precisely measured active ingredient and still fail if a dog spits it out or a cat refuses the next dose. That is why brands evaluating palatability vs potency in pet supplements should connect the formulation to real feeding behavior, not only the label claim. This article examines how to improve pet treat acceptance while protecting private label functional pet
View More
Nov. 12, 2026
Comparing Portion Formats for Private Label Wet Cat Food
Choosing between cans, trays, pouches, and cups affects more than shelf appearance. For a brand developing private label wet cat food portion formats, the decision influences the feeding routine, shipping weight, filling line, and retail price. A buyer comparing single-serve wet cat food packaging also needs to assess pâté, chunks in gravy, moisture content, retort sterilization, palatability
View More
Nov. 11, 2026
OEM vs ODM Pet Products: Control, Cost, and Speed Compared
Choosing between an OEM pet products manufacturer, ODM private label pet products, and custom pet products with low MOQ affects more than the logo on a package. It determines your pet supply manufacturing workflow, product development responsibility, and supply chain risk, as well as your MOQ, BOM, NRE, quality-control, and lead-time requirements. A retailer launching a new dog harness may need a
View More
Nov. 10, 2026
Kibble vs Canned Food: Which Format Is Easier to Scale?
Choosing between kibble and canned food becomes a production decision as soon as orders move beyond a small batch. Teams comparing kibble vs canned food for scaling pet food production, searching for how to scale dry pet food manufacturing, or evaluating the best pet food format for contract manufacturing must weigh extrusion, retort sterilization, and moisture content. The practical measures are
View More
Nov. 09, 2026
Cost Drivers in Private Label and Custom Pet Food Production
Private label pet food buyers often ask why two similar products have very different quotes. The answer usually comes from private label pet food, custom formulation, and contract manufacturing costs. Ingredient quality, recipe complexity, minimum order quantity, packaging, testing, and freight can change the final price by a large amount.
View More
Nov. 06, 2026
How to Match Treat Types to Training, Dental, and Reward Use
Choosing the right treat is not simply a matter of flavor or package size. With Xinji Biotechnology, I use a practical matching system based on treat function, texture, calorie density, dog size, and usage frequency. In this guide, I will show you How to Match Treat Types to Training, Dental, and Reward Use step by step, so your team can select safer products, improve customer satisfaction, and
View More
Nov. 05, 2026
How Palatability Testing Improves Acceptance of New Cat Food
A nutritionally complete cat food can still fail if cats refuse to eat it. This is the central commercial problem behind many unsuccessful launches: manufacturers optimize protein levels, texture, aroma, packaging, and cost, yet overlook the animal’s immediate sensory response. Cats are highly selective feeders, and a small change in fat coating, meat hydrolysate, kibble hardness, moisture, or
View More
Nov. 04, 2026
Dry vs Wet Pet Food: Shelf Life, Shipping, and Cost Compared
When a dog owner compares dry vs wet pet food shelf life, the decision is rarely about texture alone. A camping trip can expose the limits of best pet food for shipping, while a multi-pet household may focus on cost per calorie pet food rather than the price printed on the bag or can. The practical details include kibble, canned pet food, and moisture content, as well as professional measures
View More
Related Product
The company adheres to the policy of "quality, innovation" and the purpose of "reputation". On the basis of mutual benefit, we are willing to sincerely cooperate with people from all walks of life at home and abroad, and strive to seek greater win-win development!